 |
|
JZF-600/1300L center surface
automatic minute strip machine |
Main characteristic and technical
parameter: |
|
 |
This machine mainly
uses in the paper, the pure aluminum foil, PE, the PVC stretch
membrane, OPP, PP, CPP, PET, CPE and so on each kind of thin
film, the compound membrane, puts the material automatically to
correct an error, the photoelectricity track, the manual tensity,
the two axle pressure pneumatic control, receives the volume end
surface precision high, the high speed minute cuts the
performance, has the straight knife to cut, has the round knife
to cut, receives the volume to use the tile form to be mad 胀 the
axis, shears butchers the strip to receive the volume
performance to be high, According to the user request custom
make type, cuts strip width 2mm.
|
Raw material most large
diameter |
Ø400mm |
|
Raw material extreme breadth |
600mm |
|
Raw material minimum width |
2mm |
|
End product maximum outer
diameter |
Ø400mm |
|
Most cuts the strip number |
49 |
|
Cuts the speed most greatly |
5-260mm |
|
Total output |
2.2kw |
|
External dimensions |
2000*1300*1500mm |
|
Weight |
1200kg |
|
The minute cuts the precision |
±0.10mm |
|
|
JZF-600H completely automatic
center surface minute strip machine |
Main characteristic and technical
parameter: |
|
 |
This machine mainly uses in the
paper, the pure aluminum foil, PE, the PVC stretch membrane, OPP,
PP, CPP, PET, CPE and so on each kind of thin film, the compound
membrane, puts the material automatically to correct an error,
the photoelectricity track, the automatic tensity, the two axle
pressure pneumatic control, receives the volume end surface
precision high, the high speed minute cuts the performance, has
the straight knife to cut, has the round knife to cut, receives
the volume to use the tile form to be mad 胀 the axis, shears
butchers the strip to receive the volume performance to be high,
According to the user request custom make type, cuts strip width
2mm.
|
Receives the volume diameter |
Ø400mm |
|
The minute cuts the width |
2-600mm |
|
Puts the material diameter |
Ø400mm |
|
The minute cuts the speed |
5-260m/min |
|
Total output |
2.2kw |
|
External dimensions |
2000*1300*1500mm |
|
The minute
cuts the precision |
±0.10mm |
|
|
JZG-M principle light material
upscale minute strip machine |
Main characteristic and technical
parameter: |
|
 |
This machine is suitable for the principle
light material, the thin film, the small paper volume, the
photography adhesive tape, the computer and so on each kind of
high accuracy material minute cuts with the adhesive tape. Four
axes receive the volume to exchange, after bring the auxiliary
engine to put hit the rubber thin film. End surface precision
high, receives the volume to be convenient.
|
Puts the material diameter most greatly |
Ø600mm |
|
Receives the volume diameter most greatly |
Ø250mm |
|
End surface precision |
±0.20mm |
|
Quickest speed |
1500m/min |
|
Receives the rolled paper core |
0.5-1 inch |
|
Total output |
1.5-3kw |
|
Weight |
1500kg |
|
|
|
|
